How To Charge Dirt Bike Battery Properly Without Making Rookie Mistakes

0

If you are not going to use the bike for quite a long time, you should know how to charge dirt bike battery properly. The batteries will definitely lose the power and charge when they aren’t used, especially if they are going to be inactive for a long period of time. No worry, though, because you can prevent such a thing from happening by charging it regularly. A word of advice, though: never use the battery charger designed for the car to charge the bike’s battery. The car charger will provide too much power for the bike’s battery and it can damage it in the end.

The Initial Steps

Before learning how to charge dirt bike battery properly, it is crucial to know some of the initial steps to get yourself prepared. It will help you to know what to do, what accessories to have, and such thing alike.

Charge Dirt Bike Battery
Charge Dirt Bike Battery

For a starter, when you buy a bike that doesn’t come with the kickstarter, it would be wise to get the smart charger as soon as possible. You don’t need to have the sophisticated one – having the one with enough capability and easiness to use would be enough. It is usually coming with a reasonable price and the connections will be perfect for any type of brands or names.

So, what’s the difference of the trickle charger and the smart one? Well, the trickle charger is basically the regular one which operates manually. It means that you need to plug to, set up a timer, and then unplug it after the battery is fully charged. If you forget to unplug it, it is likely that your battery may be damaged. With the smart charger, on the other hand, it is the automatic type which will turn off on its own after it ‘senses’ that the battery is already filled.

Don’t forget that you also need to pay attention to the proper time length for the charge. How long or fast should it be? You want to do it slowly because the faster it is, the more likely that the battery will be damaged. Faster charge will make the retention rate gets worse, and it affects the battery’s condition. If you want to play it smart, charge the battery at around 8A. It may be long but it helps to make the battery long lasting. Charging the battery for around 4 hours to 5 hours is the standard measurement, and it is pretty safe.

How to Do It Correctly

Here are some steps on how to charge dirt bike battery properly:

  • Wear protective gloves and goggles when charging the battery. You’ll never know when accident happens. Be advised that the battery fluids are pretty toxic and acidic so you want to be careful
  • Choose an area with an open space or well ventilation.
  • By using the pliers, remove your battery. Then place it on a flat table or bench or even the floor.
  • Check connections for tears or corrosions.
  • Remove the caps. Fill in the chambers with deionized or distilled water. Avoid tap water because it has chemicals and chemicals are bad for the battery
  • Connect the cable (from the charger) to your battery. Be sure to connect the positive to positive and negative to negative
  • Connect the charger to the power outlet. Turn the charger on.
  • Leave it be until the battery is full.
  • Remove the charger from the battery. Return the caps (from the chambers) to the place and then reconnect it again to the bike.

Those are basically the steps of charging your bike’s battery correctly. Follow these steps on how to charge dirt bike battery properly and you can maintain its condition for as long as possible.

 

How To Charge Dirt Bike Battery Properly Without Making Rookie Mistakes
Rate this post

Leave A Reply